Image courtesy of  Roland Tanglao

Image courtesy of Roland Tanglao

Hey, guess what? We’re back with more on monitor mixing! As it turns out, there was another .5 way I should have mentioned. Whether I should have titled the series 4 Ways to Mix Monitors or 3.5.5 Ways to Mix Monitors is open for debate. Still, I stand by my original 3.5 ways to do it, but I want to mention another method that might be helpful. 

This was mentioned in the comments by Andrew last week, and as soon as he mentioned it, I thought, “Do! I should have mentioned that.” So here we are. 

Splitting the Board

One of the cool things about digital mixing consoles is that it is very easy to double patch your inputs. So easy in fact, if you have the channels, you can actually create a second complete copy of the input set on the desk. Let’s say you have a 32 channel board, and you use 12 channels each week from the stage. You could double-patch every input to two layers of the console. The top layer could be your FOH mix, while the second layer would be your monitor mix. 

Why would you do that? Well, the primary reason is to build custom EQ and effects for monitors and FOH, separately. Sometimes, the EQ you do for FOH doesn’t work well for monitors, and visa-versa. A board split like this makes it easy to keep both happy. 


As mentioned, being able to set separate EQ and compression for the monitors can be a real boon to the musicians. It also frees up the FOH engineer to make decisions based on what is best for the room without being worried that it’s going to mess up the musicians. While audio is usually a compromise somewhere, it’s nice to not have to compromise this. It also has the added benefit of separating the monitor sends from FOH. By putting the channels for monitors on a separate layer (or on separate channels, depending on the board), it reduces the chances that you’ll accidentally mess up the FOH mix when you meant to adjust a monitor mix. Sends on faders can be your best friend or worst enemy. 


While the added flexibility is good, it also adds complexity. This may not be good. For beginning engineers, or those new to digital, this can be confusing. Or not. It depends. You’ll have to assess your team before deciding to go this route. Obviously, it burns channels, double in fact. Depending on the console, it can either be easy or hard to logically split the channels out; again this is something you need to assess. It also could mean a few more button presses to get to monitors, which may slow you down a bit. 

Is It Right For Your Church?

That is the question. Like every other method we’ve talked about, there are pros and cons, and not every method is right for every setting. In this case, you obviously need to have the spare channels, and the ability to manage two copies of every input. If you are setting a completely different stage each week, this could get tedious fast. But if you have a very similar or the same band configuration each week, this may be a Godsend. 

OK, I think we’re really done now. Unless anyone else has any crazy ideas on how to mix monitors!

Today’s post is brought to you by Elite Core Audio. Elite Core Audio features a premium USA built 16 channel personal monitor mixing system built for the rigors of the road. For Personal Mixing Systems, Snakes, and Cases, visit Elite Core Audio.

This post is brought to you by Shure Wireless. The new ULX D Dual and Quad wireless systems feature RF Cascade ports, a high density mode with significantly more simultaneous operating channels and bodypack diversity for mission critical applications. Visit their website at