Back to our InfoComm 2016 coverage today. Probably my favorite show of the year, it has something for everyone. Today, we’ll look at laser-phosphor projectors and some cool new stuff from Marshall.
Frickin’ Laser Beams
Another thing we saw a lot of was laser beams. Or, more accurately, laser phosphor projectors. We may finally be on the cusp of those big, expensive, hot and fragile projector bulbs going the way of the dodo. Christie showed off their new HS series projectors, which pack 13K lumens into a small, quiet package. They have two models, a WU 1920×1200 pixels and HD 1920×1080 pixels. They had them set up in “Christie Arena,” and they looked quite good. Plenty of color, punch and contrast. Being 1 DLP units, they didn’t quite blend as nicely as the 3 DLP units across the booth, but for single screen applications (or if you’re using an external blending unit), they would rock. Pricing is getting better for LP units as well.
Also on the LP (laser phosphor, if you forgot) bandwagon is Hitachi. The new LP-WU9750B sports 8000 lumens of 1920×1200 single DLP power. They’re doing some cool stuff with the blue light, running it through a phosphor rod to get better accuracy. Hard to tell for sure, but they looked good in their booth. Hitachi has become our go-to affordable mid-size projector, and we think these are going to be good options for a lot of churches.
What’s better than a laser driving your projector? How about a laser driving your 4K projector! That’s right, Barco showed off the F90-4K13 projector. 11,800 lumens (not 12K…11,800; I appreciate the accuracy, though maybe it should be called the F90-4K11.8?), 3840×2400 pixels, and an engine that meets the full Rec. 709 color space. I’ll admit, it looked really nice. Now, if you don’t really need that many pixels (or have that large a budget), the F90-W13 also looked very good. It delivers 13,000 lumens in the center of the screen at 1920×1200 pixels. Like most LPs (maybe all) it’s a single chip DLP and delivers somewhere between 20,000 and 40,000 hours of light source life. On both those product pages, Barco offers a good white paper on how LP projectors work. Might be worth the read.
Marshall has been coming on strong the last few years with the introduction of their Lynx series of monitors, the small HD POV cameras with HD-SDI out and the mini converters. This year, we saw a 17” engineering monitor that had full color space capability, the ability to be fully calibrated and great metering and signal quality monitoring capabilities. The V-R173-DLW looked very accurate and like many Marshall products offers tremendous value.
One of our favorite little problem solvers is the VSW-2200. It’s a deceptively simple 4 HD-SDI in, 1 out seamless switcher/scaler. What makes it super-cool is that it also incorporates a built-in quad-view display (on a separate HDMI output), and can be set up and controlled via software. It’s a vertical interval switch, but more than that, it scales every input to a common output resolution so you can switch completely seamlessly. If you only need to switch a few sources, this is a cool solution.
More to come next time!